Box Office » Pumice (SKU 1006845)

50% Acrylic, 50% Polyester
Teflon®
Meets or exceeds all ACT Standards

*ACT ® Registered Certification Marks

Print Info Sheet

Show Technical Details

Technical Details

Fabric Specifications
Content	50% Acrylic, 50% Polyester
Backing	Acrylic
Weight	11.7 oz. per linear yd
Width	54"
Ends/Picks	Ends: 142 per inch Picks: 30 per inch
Repeat	H - 7.375" V - 7.0"
Directional	Yes
Railroaded	No
Finish	Teflon®
Performance Characteristics
Abrasion Resistance (ASTM D4157)	30,000 double rubs
Tensile Strength (ASTM D5034)	Warp: 250.0 lbs. Fill: 119.0 lbs.
Tear Strength (ASTM D2262)	Warp: 12.0 lbs. Fill: 17.0 lbs.
Seam Slippage (ASTM D4034)	Warp: 64.9 lbs. Fill: 54.0 lbs.
Brush Pill (ASTM D3511)	Class 3
Colorfastness To Crocking (AATCC 8)	Dry: 5.0 Wet: 3.0
Colorfastness To Light (AATCC 16)	Hours: 40 Class: 4
Flammability*
California Technical Bulletin 117 Section E	Passes
NFPA 260	Class 1
UFAC	Class 1
Recommended Cleaning**
S - Clean this fabric with pure solvents (petroleum distillate-based products, Energine, Carbona, Renuzit, or similar products may be used), in a well-ventilated room. Cleaning by a professional furniture cleaning service only is recommended.

Although we try hard to make sure colors on our site are accurate, actual colors may vary. Please order samples prior to making a purchase.
Final determination of the suitability of this product for an application rests with the user.
* This term and any corresponding data refer to the typical performance in the specific tests indicated and should not be construed to imply the behavior of this or any other material under actual fire conditions.
** Cleaning information is offered for general guidance and is not a guarantee. The use of certain cleaning agents can be harmful to the surface appearance and lifespan of a product. Burch Fabrics assumes no repsonsibility for damage to a product resulting from lack of cleaning, improper cleaning or the misuse of cleaning agents. Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to materials and cause permanent damage. Burch Fabrics cannot be held responsible for dye transfer caused by external contaminants.